Tlhaloso:
Mochini oa dosing le oa ho tlatsa o nang le lihlooho tse 'ne tsa auger ke mohlala o kopaneng o nkang sebaka se senyenyane mme o tlatsa ka makhetlo a mane ho feta hlooho e le' ngoe ea auger.Mochine ona ke tharollo bakeng sa ho phethahatsa litlhoko tsa mohala oa tlhahiso.E laoloa ke tsamaiso e bohareng.Tsela e 'ngoe le e' ngoe e na le lihlooho tse peli tsa ho tlatsa, e 'ngoe le e' ngoe e khona ho tlatsa tse peli tse ikemetseng.Sekurufu se tšekaletseng se nang le li-outlet tse peli se ka fepa lisebelisoa ka har'a lihopa tse peli tsa auger.
Molao-motheo oa ho sebetsa:
-Filler 1 le Filler 2 li ho Lane 1.
-Filler 3 le Filler 4 li ho Lane 2.
- Li-filler tse 'ne li sebetsa 'moho ho fihlela bokhoni bo imenneng hane ho feta setlatsi se le seng.
Mochini ona o ka lekanya, 'me oa tlatsa lisebelisoa tsa phofo le granular.E kenyelletsa lihlopha tse peli tsa lihlooho tse tlatsang mafahla, conveyor e ikemetseng ea ketane e kentsoeng holim'a motheo o tiileng, o tsitsitseng oa foreimi, le lisebelisoa tsohle tse hlokahalang ho tsamaisa le ho beha lijana bakeng sa ho tlatsa, ho fana ka palo e hlokahalang ea sehlahisoa, 'me kapele u tsamaise lijana tse tlatsitsoeng. ho lisebelisoa tse ling mocheng oa hau.E sebetsa hantle ka lisebelisoa tse nang le metsi kapa tse fokolang joalo ka phofo ea lebese, phofo ea albin, le tse ling.
Moetso:
Kopo:
Ho sa tsotelehe ts'ebeliso, e ka thusa liindasteri tse fapaneng ka mekhoa e mengata.
Indasteri ea Lijo - phofo ea lebese, phofo ea protheine, phofo, tsoekere, letsoai, phofo ea oat, joalo-joalo.
Indasteri ea Litlhare - aspirin, ibuprofen, phofo ea litlama, joalo-joalo.
Indasteri ea Litlolo - phofo ea sefahleho, phofo ea manala, phofo ea ntloana, joalo-joalo.
Indasteri ea lik'hemik'hale - phofo ea talcum, phofo ea tšepe, phofo ea polasetiki, joalo-joalo.
Likarolo tse Khethehileng:
1. Mohaho ona o ne o hahiloe ka tšepe e sa hloekang.
2. Sekoti se arohaneng se ne se le bonolo ho hloekisa ntle le tšebeliso ea lisebelisoa.
3. Sekurufu sa servo motor.
4. A PLC, skrine ea ho ama, le module ea boima e fana ka taolo.
5. Ke lihlopha tse 10 feela tsa lihlahisoa tsa lihlahisoa tse lokelang ho bolokoa bakeng sa tšebeliso ea nako e tlang.
6. Ha likarolo tsa auger li nkeloa sebaka, li ka sebetsana le lisebelisoa ho tloha ho phofshoana e nyenyane haholo ho ea ho granules.
7. Kenyelletsa lebili la letsoho le fetolehang ka bolelele.
Tlhaloso:
| Seteishene | Automatic Dual Heads Linear Auger Filler |
| Mokhoa oa ho noa | Ho noa ka ho toba ka auger |
| Ho Tlatsa Boima | 500kg |
| Ho Tlatsa ho Nepaha | 1 - 10g, ± 3-5%;10 - 100g, ≤±2%;100 - 500g, ≤±1% |
| Ho Tlatsa Lebelo | 100 - 120 libotlolo ka motsotso |
| Phepelo ea motlakase | 3P AC208-415V 50/60Hz |
| Phepelo ea Moea | 6 kg/cm2 0.2m3/min |
| Kakaretso ea Matla | 4.17 kw |
| Kakaretso ea Boima | 500kg |
| Kakaretso Dimension | 3000×940×1985mm |
| Molumo oa Hopper | 51L*2 |
Tlhophiso:
| Lebitso | Tlhaloso ea Mohlala | SEBAKA SE HLAHANG/Lets'oao |
| HMI |
| Schneider |
| Phetoho ea maemo a tšohanyetso |
| Schneider |
| Contactor | CJX2 1210 | Schneider |
| Relay ea mocheso | NR2-25 | Schneider |
| Sekoahelo sa potoloho |
| Schneider |
| Relay | MY2NJ 24DC | Schneider |
| Sensor ea lifoto | BR100-DDT | Autonics |
| Sensor ea boemo | CR30-15DN | Autonics |
| Enjene ea conveyor | Setšoantšo sa 90YS120GY38 | JSCC |
| Conveyor reducer | 90GK(F)25RC | JSCC |
| Moqomo oa moea | TN16×20-S, 2units | AirTAC |
| Fiber | RiKO FR-610 | Autonics |
| Moamoheli oa fiber | BF3RX | Autonics |
Lintlha: (Lintlha tse matla)
Hopper
304/316 hopper ea tšepe e sa hloekang e felletseng ea Hopper ke boemo ba lijo, ho bonolo ho e hloekisa, 'me e na le chebahalo ea boemo bo holimo.
Mofuta oa Screw
Ha ho na likheo bakeng sa phofo ho pata ka hare, 'me ho bonolo ho hloekisa.
Moqapi
Welding e felletseng, ho kenyeletsoa moeli oa hopper mme ho bonolo ho e hloekisa.
Mochine oohle
Mochini oohle, ho kenyeletsoa setsi le sets'oants'o sa makoloi, o entsoe ka SS304, e matla le ea boleng bo holimo.
Lebili la letsoho
E loketse ho tlatsa libotlolo / mekotla ea bophahamo bo sa tšoaneng.Fetola lebili la letsoho ho phahamisa le ho theola setlatsi.Motšoari oa rona o motenya ebile o matla ho feta ba bang.
Sensor ea Interlock
Haeba hopper e koetsoe, sensor ea e lemoha.Ha hopper e butsoe, mochini o ema ka bo eona ho thibela opareitara hore a se ke a tsoa kotsi ka ho fetola auger.
Lihlooho tse 4 tsa ho tlatsa
Lipara tse peli tsa li-fin fillers (li-filler tse 'nè) li sebetsa 'moho ho finyella matla a mabeli a hlooho e le 'ngoe.
Li-Augers le Nozzles tsa boholo bo fapaneng
Molao-motheo oa ho tlatsa auger o bolela hore palo ea phofo e theoleloang ka ho fetola selikalikoe se le seng e tsitsitse.Ka lebaka leo, boholo bo fapaneng ba auger bo ka sebelisoa mefuteng e fapaneng ea ho tlatsa boima ba 'mele ho fihlela ho nepahala le ho boloka nako.Auger ea boholo bo bong le bo bong e na le tube ea auger ea boholo bo lekanang.Ka mohlala, Día.Sekoti sa 38mm se loketse ho tlatsa lijana tsa 100g-250g.
Boholo ba Mohope le Range ea ho Tlatsa
| Taelo | Mohope | Diameter ka hare | Kantle Diameter | Tlatsa Range |
| 1 | 8# | 8mm | 12 limilimithara | |
| 2 | 13# | 13 limilimithara | 17mm | |
| 3 | 19# | 19 limilimithara | 23 limilimithara | 5-20g |
| 4 | 24# | 24 limilimithara | 28mm | 10-40g |
| 5 | 28# | 28mm | 32 limilimithara | 25-70g |
| 6 | 34# | 34 limilimithara | 38 limilimithara | 50-120g |
| 7 | 38# | 38 limilimithara | 42 limilimithara | 100-250 g |
| 8 | 41# | 41 limilimithara | 45 limilimithara | 230-350g |
| 9 | 47# | 47 limilimithara | 51 limilimithara | 330-550g |
| 10 | 53# | 53 limilimithara | 57 limilimithara | 500-800 g |
| 11 | 59# | 59 limilimithara | 65 limilimithara | 700-1100 g |
| 12 | 64# | 64 limilimithara | 70 limilimithara | 1000-1500 g |
| 13 | 70# | 70 limilimithara | 76 limilimithara | 1500-2500 g |
| 14 | 77# | 77 limilimithara | 83 limilimithara | 2500-3500g |
| 15 | 83# | 83 limilimithara | 89 limilimithara | 3500-5000g |
Tlhophiso le Tlhokomelo
-Ha u amohela mochini, seo u tlamehang ho se etsa feela ke ho phutha likhreiti le ho hokela matla a motlakase a mochini, 'me mochini o tla be o loketse ho sebelisoa.Ho bonolo haholo ho hlophisa mechini ho sebetsa bakeng sa mosebelisi ofe kapa ofe.
-Hang ka mor'a likhoeli tse tharo kapa tse 'nè, eketsa oli e nyenyane.Ka mor'a ho tlatsa lisebelisoa, hloekisa lihlooho tse 'nè tsa auger filler.
E ka hokahana le Mechini e meng
Li-heads tse 4 auger filler li ka kopanngoa le mechini e fapaneng ho theha mokhoa o mocha oa ho sebetsa ho fihlela litlhoko tse fapaneng tsa tlhahiso.
E lumellana le lisebelisoa tse ling meleng ea hau, joalo ka li-cappers le li-labelers.
Tlhahiso le Ts'ebetso
Sehlopha sa rona
Litifikeiti
Tšebeletso & Litšoaneleho
■ Guarante ea LILEMO TSE PELI, WARATI YA ENGINE THREEYEARS, tšebeletso ea bophelo bohle (Tšebeletso ea Warranty e tla hlomphuoa haeba tšenyo e sa bakoe ke ts'ebetso ea motho kapa e sa lokelang)
■ Fana ka lisebelisoa tsa lisebelisoa ka theko e ntle
■ Nchafatsa tlhophiso le lenaneo khafetsa
■ Araba potso efe kapa efe ka mor'a lihora tse 24
